carbon spars

could'nt we ask a chinese corp to produce us carbone tubes for this most fragile part of ther Quickie , the front canard
what are the dimensions are caracteristics expected ?
Peter Harris just announced that he wouldn't provide any more these parts
www.compositecreations.com/Products/prod...quickeewingspars.htm

fuhai.en.alibaba.com/product/50769039-50079582/carbon_tube.html

actually is there somewhere a construction log of canard and wings , from plans I hardly imagine anything

The original spars made for QAC came from two sources. One was Larry Howell of Dallas, TX and the other was a Californian company. Ref: Q-Talk #87.

Replacement spars for both the Quickie and Q-200 have also been made by Composite Creations in Australia via the very experienced Peter Harris, using a mandrel specifically made for the job. I followed your link and apparently they are still available.

Since this is a critical component for the safety of the aircraft, they should not be made in China.

Rob

There is one other option, you can use Graphlite to make the LS1 canard. In that case you'll need 1100ft of it, so you won't save much money.

Rob

Is there a 3D Model of the Q1 & Q2/Q200 Carbon Spars?

Is there a 3D Model of each Wing?