How many Q1's do you think have reflexors. Do you think they are
necessary? I am not using the Onank but the replacement is not much
heavier (about 100# with everything). Is the reflexor pretty much
required on the Q2/200's and just a convenience. As I stand now I
have the ailerons set up per the plans. If I don't really need a
reflexor, I may want to add it later. I was planning an access panel
over that section anyway. I have added a belcrank for the rudder/
tailwheel. The belcrank has turn buckels for adjustment of the
rudderpedals, tailwheel and rudder. Do you think I need springs on
the tailwheel (due to flexing), if so would they need to be the
(reverse) springs in ACS? Thanks Dave R.
Thats most of whats on my mind at this time. Otherwise I put it
on.... Sand it off.... put it on .... sand it off. (repeat).
Dave R.
Q1 Texas
d2r@...