Dave, I'd like to know what diameter and pitch you chose. Stan
davedrosen <
d2r@...
> wrote: Prince aircraft company. He has been very
helpful and will build you
really what you need. He does work for a lot of UAV companies and
specials like wind tunnel props etc.
www.princeaircraft.com/
He is making me a prop with the proper twist needed for a Q1 running
on a Hexadyne engine--3200 rpm and a short prop. Others would sell a
prop but I would never get the speed, even adding blades etc. I
should have it next week or so. It takes 30 days. Lonie Prince has
been very good to deal with. I will post after I receive the prop.
Dave R.
Q1
Texas
Flyin in 06!
--- In
This email address is being protected from spambots. You need JavaScript enabled to view it.
, Tad Simpson
<rebeccaandtad_simpson@y...> wrote:
> Dave,
> Where did you get your custom made composite propo ?
>
> davedrosen <d2r@t...> wrote:
> Ron,
> The engine manufacturer, Hexadyne engineering, lent me a 'mock'
> engine. It's basically the real engine with no internals--pistons,
> crank etc. I mounted it up just as the real engine will be.
> Visqueened it, duck tape, garbage bagged it. then foamed over it.
My
> biggest problem has been the artistic part....getting it even on
> both sides etc. I need to get er done, because I will have the
real
> engine shortly (and prop). I should get my custom made composite
> prop this week or next at the latest. I will run to wally world
and
> try some of that hot mud today. I would like to make sun n fun
next
> year--or if not oshkosh.
>
> Dave R.
>
>
>
>
>
> --- In
This email address is being protected from spambots. You need JavaScript enabled to view it.
, 'Ron' <rondefly@p...> wrote:
> > Dave, you might try using 45 minute hot mud, it is drywall mud
> that sets up
> > quicker and you can build it up thicker if needed. Just be sure
> you seal it
> > prior to glassing. How are you getting the dimensions for the
cowl
> if you
> > don't have the engine?
> >
> > Ron T
> >
> >
> >
> > Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
> >
>
bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.
> html
> >
> >
>
bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.
> html
> >
> > _____
> >
> > From:
This email address is being protected from spambots. You need JavaScript enabled to view it.
> [mailto:
This email address is being protected from spambots. You need JavaScript enabled to view it.
] On
> > Behalf Of davedrosen
> > Sent: Saturday, October 01, 2005 5:15 PM
> > To:
This email address is being protected from spambots. You need JavaScript enabled to view it.
> > Subject: [Q1_Aircraft] Spackel
> >
> >
> >
> > All,
> > I've been using spackel to shape the mold for my cowling. It
works
> > great. I started out using bondo, but the drywall spackel works
> much
> > better. It's easy to sand and re-do. I'm trying to get the
cowling
> > done before my engine and prop arrive and the drywall makes it
> very
> > easy. thanks
> > Dave R.
> > Q1
> > Texas
> >
> >
> >
> >
> >
> > _____
> >
> > YAHOO! GROUPS LINKS
> >
> >
> >
> > * Visit your group 'Q1_Aircraft
> > <
groups.yahoo.com/group/Q1_Aircraft
> ' on the web.
> >
> >
> > * To unsubscribe from this group, send an email to:
> >
This email address is being protected from spambots. You need JavaScript enabled to view it.
> > <mailto:
This email address is being protected from spambots. You need JavaScript enabled to view it.
?
> subject=Unsubscribe>
> >
> >
> > * Your use of Yahoo! Groups is subject to the Yahoo!
> > <
docs.yahoo.com/info/terms/
> Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
> SPONSORED LINKS
> Experimental aircraft Aviation gear Aviation Experimental
>
>
> YAHOO! GROUPS LINKS
>
>
> Visit your group 'Q1_Aircraft' on the web.
>
> To unsubscribe from this group, send an email to:
>
This email address is being protected from spambots. You need JavaScript enabled to view it.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
>
>
>
>
> Yahoo! for Good
> Click here to donate to the Hurricane Katrina relief effort.
>
> [Non-text portions of this message have been removed]
YAHOO! GROUPS LINKS
Visit your group 'Q1_Aircraft' on the web.
To unsubscribe from this group, send an email to:
This email address is being protected from spambots. You need JavaScript enabled to view it.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]