Q1_Aircraft: Prop clearance

Greetings,
I will soon be turning my attention to props for my Q1. Because my
engine is not an Onan, I will have a different prop. What is the
recommended clearance for the prop tip to ground when the airplane
is firewall perpendicular to the ground? What are some of the prop
sizes on other Q1's and super Q1's? My prop centerline is 2' above
where the onan prop would have occured.

Thanks in advance.
Dave R.
Texas
d2r@t...

Finihing cowling, intrument panel out getting powder coated.... time
to start thinkin propeller. PS I'm leaning towards a powerfin prop
with 3 or 4 blades.

The book firewall forward suggests 9' clearance between the prop tip and ground.

davedrosen < d2r@... > wrote:
Greetings,
I will soon be turning my attention to props for my Q1. Because my
engine is not an Onan, I will have a different prop. What is the
recommended clearance for the prop tip to ground when the airplane
is firewall perpendicular to the ground? What are some of the prop
sizes on other Q1's and super Q1's? My prop centerline is 2' above
where the onan prop would have occured.

Thanks in advance.
Dave R.
Texas
d2r@t...

Finihing cowling, intrument panel out getting powder coated.... time
to start thinkin propeller. PS I'm leaning towards a powerfin prop
with 3 or 4 blades.






Yahoo! Groups SponsorADVERTISEMENT
document.write('');

---

Yahoo! Groups Links

To visit your group on the web, go to:
groups.yahoo.com/group/Q1_Aircraft/

To unsubscribe from this group, send an email to:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
mail.yahoo.com

[Non-text portions of this message have been removed]