Q1_Aircraft: Q2 or Q1 kit

Hi,

I'm looking for a Q2 kit preferrably unstarted, original and complete
including plans. Cheap as possible, within reasonable bounds. Must be
willing to ship to Australia. Tri-gear kit and/or LS1 canard a bonus but
not essential. Engine is optional but prefer to source that locally.

Quickie (Q1) kit in original condition also considered if at a bargain
price.

Contact: Rob mailto:judd@o... +61 3 9793 0137

I know a guy that has a complete Q-200 kit with LS1 canard and tri gear. Cores
have been cut and that's about it. Getting him to ship it might be the hard
part. Kits about 40 miles from here in a real small town. Older gentleman owns
it and several other non-finished kits. Get in touch with me direct and let me
know what you want to pay and I can pass it on to him.

John A.
Havre, Montana

---

Original Message

---

From: HAIQU_OZ
To: This email address is being protected from spambots. You need JavaScript enabled to view it.
Sent: Wednesday, October 27, 2004 10:51 AM
Subject: [Q1_Aircraft] Q2 or Q1 kit



Hi,

I'm looking for a Q2 kit preferrably unstarted, original and complete
including plans. Cheap as possible, within reasonable bounds. Must be
willing to ship to Australia. Tri-gear kit and/or LS1 canard a bonus but
not essential. Engine is optional but prefer to source that locally.

Quickie (Q1) kit in original condition also considered if at a bargain
price.

Contact: Rob mailto:judd@o... +61 3 9793 0137






Yahoo! Groups Sponsor
ADVERTISEMENT

---

Yahoo! Groups Links

a.. To visit your group on the web, go to:
groups.yahoo.com/group/Q1_Aircraft/

b.. To unsubscribe from this group, send an email to:
This email address is being protected from spambots. You need JavaScript enabled to view it.

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




[Non-text portions of this message have been removed]

Hi John,

Thanks for your response. Dealing through a third party at this
distance probably would be difficult. And if the gentleman has started
and not finished several kits I don't like my chances of getting all
the bits crated and shipped here. He sounds fairly disorganized.

Thanks anyhow.

Rob


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'John P.' <johnand@h...> wrote:
> I know a guy that has a complete Q-200 kit with LS1 canard and tri
gear. Cores have been cut and that's about it. Getting him to ship it
might be the hard part. Kits about 40 miles from here in a real small
town. Older gentleman owns it and several other non-finished kits. Get
in touch with me direct and let me know what you want to pay and I can
pass it on to him.
>
> John A.
> Havre, Montana
>

---

Original Message

---

> From: HAIQU_OZ
> To: This email address is being protected from spambots. You need JavaScript enabled to view it.
> Sent: Wednesday, October 27, 2004 10:51 AM
> Subject: [Q1_Aircraft] Q2 or Q1 kit
>
>
>
> Hi,
>
> I'm looking for a Q2 kit preferrably unstarted, original and complete
> including plans. Cheap as possible, within reasonable bounds. Must be
> willing to ship to Australia. Tri-gear kit and/or LS1 canard a
bonus but
> not essential. Engine is optional but prefer to source that locally.
>
> Quickie (Q1) kit in original condition also considered if at a bargain
> price.
>
> Contact: Rob mailto:judd@o... +61 3 9793 0137
>
>
>
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
>

---

> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> groups.yahoo.com/group/Q1_Aircraft/
>
> b.. To unsubscribe from this group, send an email to:
> This email address is being protected from spambots. You need JavaScript enabled to view it.
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
> [Non-text portions of this message have been removed]

Additional information:

I have a local contact who can ship from Vans Aircraft (Oregon) in a
container leaving at the end of November. Preference will therefore be
given to kits available in the general vicinity of the West Coast.

My budget probably doesn't run to Q200s with LS1 and tri-gear. Think
$2000.00 _maximum_ and you can't go wrong.

Rob


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'HAIQU_OZ' <judd@o...> wrote:
>
> Hi,
>
> I'm looking for a Q2 kit preferrably unstarted, original and complete
> including plans. Cheap as possible, within reasonable bounds. Must be
> willing to ship to Australia. Tri-gear kit and/or LS1 canard a bonus but
> not essential. Engine is optional but prefer to source that locally.
>
> Quickie (Q1) kit in original condition also considered if at a bargain
> price.
>
> Contact: Rob at judd@... ... +61 3 9793 0137

Leon,

What would you charge for a set of mechanical drawings and templates?
I'm interested because I found the plans online a while ago but there
are no drawings.

If you have Q2 plans or know of where to find them I would also be
interested, but I do realise they were sold as pre-molded parts and
may not be available.

Rob


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Leon - Allure' <leon@a...> wrote:
>
>
> > Date: Wed, 27 Oct 2004 10:21:40 -0700
> > From: 'gordon' <gordon@h...>
> > Subject: Re: Q2 or Q1 kit
> >
> > Where do you buy Q1 Plans at other than on EBay that so many are
selling
> CD's of
> >
> >
> > g( )b
> > Home of the Junk Yard Dog 'Chrissy'
>
> eBay is about the only place you'll find them. I havent seen a set on
> Barnstormers for a loooong time. Get the CD from Quickie source - it's
> better. I have one and the prints from the PDF files are cleaner
than my
> original plans. If you need full size template I sell them -
ocassionally
> on eBay. Save $10 off the eBay price and contact me directly if you
need a
> set. I also have drawings of all of the factory supplied machined and
> welded parts, also full size.
> =================
> Leon McAtee

Leon,

Don't quite understand what you mean when you say 'get the CD from
Quickie source'. Is this a different supplier than the guy selling on
eBay?

Also, can these really be built off plans? I thought the original
airplane was supplied with a fuselage kit pre-built.

Rob

--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'Leon - Allure' <leon@a...> wrote:
>
>
> > Date: Wed, 27 Oct 2004 10:21:40 -0700
> > From: 'gordon' <gordon@h...>
> > Subject: Re: Q2 or Q1 kit
> >
> > Where do you buy Q1 Plans at other than on EBay that so many are
selling
> CD's of
> >
> >
> > g( )b
> > Home of the Junk Yard Dog 'Chrissy'
>
> eBay is about the only place you'll find them. I havent seen a set on
> Barnstormers for a loooong time. Get the CD from Quickie source - it's
> better. I have one and the prints from the PDF files are cleaner
than my
> original plans. If you need full size template I sell them -
ocassionally
> on eBay. Save $10 off the eBay price and contact me directly if you
need a
> set. I also have drawings of all of the factory supplied machined and
> welded parts, also full size.
> =================
> Leon McAtee