-
Forum
-
Q2 and Q-200 Aircraft
-
Q2/Q-200 Forum
-
Q200 LS1 Canard and wheel pants
Q200 LS1 Canard and wheel pants
Less
More
-
Posts: 4
-
Thank you received: 0
-
-
13 years 8 months ago #942
by rwrogers
I am looking for a virgin or barely started Q200 kit to buy and had the following questions. Were the LS1 carnard and wheel pant manafactured by the Quickie company with the kit or were they to be fabricated by the builder. If they were not supplied is there anyone who supplies prebuilt parts?
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 167
-
Thank you received: 5
-
-
-
-
-
13 years 8 months ago #943
by admin
Hey RW,
Even though the Q-200 was sold as a kit, most of the parts were manufactured by the builder. This includes the wheel pants and the LS1 canard.
QAC provided the carbon fiber spars for the LS1 canard, and later provided molded foam wheel pants. These still needed to be put together by the builder.
I have some pictures of what the wheel pants they provided looked like here:
www.quickheads.com/dont-wear-the-wheel-pants.html
There are a couple of virgin Q-200 kits in the QBA classified ads located here:
www.quickheads.com/forsale.html
Hope this helps. Please let me know.
Warm regards,
Dan Yager
QBA Editor
www.quickheads.com
Flying an aeroplane with only a single propeller to keep you in the air. Can you imagine that?
— Captain Picard, from 'Star Trek: The Next Generation' episode 'Booby Trap.'
Please Log in or Create an account to join the conversation.
-
Forum
-
Q2 and Q-200 Aircraft
-
Q2/Q-200 Forum
-
Q200 LS1 Canard and wheel pants
Time to create page: 0.324 seconds