Q1 Plans Chapter 20 Page 20-5
- Category: Quickie Plans
- Published: Tuesday, 03 June 2008 01:00
- Written by Jun Su
- Hits: 1562
The brake system consists of one mechanical tire scrubber per tire (BSW2), actuated by a 3/32” cable that runs over a pulley (AN21O-1A) in the wheel pant, through the 3/16” diameter Nylaflow tubing to the opposite wheel pant where it connects up to another BSWZ in the same fashion. The system is actuated by a pull handle in the cockpit. The brake shoes (BSW) are spring loaded in the “off” position.