QuickTalk 1 - BLACKBOARD
- Category: Q-Talk Articles
- Published: Sunday, 28 February 1982 06:11
- Written by Jim Masal
- Hits: 1449
From Donald Ulrich (New Hartford, NY)
If you have a good extension ladder, it can be used as a base for constructing a good, sturdy workbench to lay-up your Q2 wing and canard. Also a couple of old oil drums make a good support for the bench.
Cut hardboard or plywood as above for a 32" x 20' Work Surface. Clamp or secure pieces to the same section of the extension ladder. Support ladder on old oil drums or other available means. Work surface can be easily leveled by installing shims between ladder sections.
From Mike Conlin (Conroe, TX)
You can order a PDF or printed copy of QuickTalk #1 by using the Q-talk Back Issue Order Page.