Q2 Plans Chapter 16 Page 16-02
- Details
- Category: Q-2/Q-200 Plans
- Published: Friday, 05 May 2006 20:05
- Written by Quickie Aircraft Corporation
- Hits: 3655
MOUNTING THE ENGINE
..... A typical engine mount assembly is shown in the sketches. Mount the engine permanently. ![]() ![]() MOUNTING THE PROPELLER
..... The propeller is delivered to the builder with the mounting holes pre9rilled. .....Make EM3 from a piece of 0.25" thick 606IT6 Aluminum. A full size pattern is provided.. Use the predrilled propeller to drill the six bolt holes in the EM3. .....The propeller is mounted with 6 AN6-37A bolts. Note that the spinner is not shown in the illustrations because complete mounting instructions are included with the spinner itself. ![]() ![]() |
||||
|
||||
PAGE
16-2 |