Q1_Aircraft: newbie question

hi guys im buldnig q-1 from cd i bought fwe months ago from ebay im
almost done with fuselage next comes wing and than canard i have all
templates but i dont know what size they have to be printed out like
long ez and varieze have all pages 18x24 im not sure if this is the
right size or it have to be smaller like 12x24,i ll also appreciate any
info about where to get some plans for ls-1 canard and source for
carbonfibre spar for it thanks

The Q1---Quickie, uses a hand laid up fiberglass spar/spar caps. The
Q200 two place used the tubular carbon fibre spars. My company, Best
American Mfg Corp made the last few hundred of those.
Larry H.


--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'jan' <jany77@...> wrote:
>
> hi guys im buldnig q-1 from cd i bought fwe months ago from ebay im
> almost done with fuselage next comes wing and than canard i have all
> templates but i dont know what size they have to be printed out like
> long ez and varieze have all pages 18x24 im not sure if this is the
> right size or it have to be smaller like 12x24,i ll also appreciate
any
> info about where to get some plans for ls-1 canard and source for
> carbonfibre spar for it thanks
>

i just found one who makes spar for both airplanes hes in australia here is
just quote

The price is AUD1400 per pair for Q200 and AUD1350 for the Q1 spars. There is an
additional charge of AUD40 for packaging and approx AUD250 for air freight
delivery to your nearest International airport.
laheze < laheze@... > wrote:
The Q1---Quickie, uses a hand laid up fiberglass spar/spar caps. The
Q200 two place used the tubular carbon fibre spars. My company, Best
American Mfg Corp made the last few hundred of those.
Larry H.

--- In This email address is being protected from spambots. You need JavaScript enabled to view it. , 'jan' <jany77@...> wrote:
>
> hi guys im buldnig q-1 from cd i bought fwe months ago from ebay im
> almost done with fuselage next comes wing and than canard i have all
> templates but i dont know what size they have to be printed out like
> long ez and varieze have all pages 18x24 im not sure if this is the
> right size or it have to be smaller like 12x24,i ll also appreciate
any
> info about where to get some plans for ls-1 canard and source for
> carbonfibre spar for it thanks
>






[Non-text portions of this message have been removed]

did you see the templates in the file section of this site? are they
same?

Did you finesh your project{Q1}, I think the templates have to be
printed on 11x17 inch paper thats what the seller on ebay told me when
I got the CD.
you should post some build photos on the site, it would be intresting
to see how the it looks.