Q1 Plans Chapter 4 Page 4-1
- Details
- Category: Quickie Plans
- Published: Monday, 12 May 2008 12:27
- Written by Jun Su
- Hits: 5070
Phenolic sheet is used in the Quickie for control system bearings. This section includes a full size layout of all of the phenolic bearings in the aircraft. The precision holes have been already reamed to size by Quickie Aircraft Corporation, so that by laying the pattern over the phenolic, you can cut out the parts. The remaining holes you will drill since they are non-critica1 on diameter and are used to improve the bond between the phenolic and the fiberglass or foam.
