Hour 79 - Main Tank Jig
- Details
- Category: Quickheads BLOG
- Published: Wednesday, 27 January 2010 00:00
- Written by Dan Yager
- Hits: 5207
{flv}construction/hour079{/flv}
In this video, I screwed together all of the jig formers that I created and then flush the edges on the table saw. Next, I used my handy belt sander to sand all of the pieces so that they were exactly the same shape.
Next up I put it all together. Does anyone have a pneumatic nailer. (Boy that would come in really handy about now!)
As always I invite your feedback below, or in the forums!